| | Sector | abcRailways Transport Services | Tender Value | N.A. | | Location | Punjab - India | Ref.No | 85609712 | | Closing Date | 11 - Aug - 2025 | | | FERRITIC STEEL SHEET .
* FERRITIC STEEL SHEET 8X1250X3000MM., as per Drawing IS6911-1992,GRADE X04Cr1
2 (405), SURFACE FINISH 2D AS PER TAB. 8., Packing Instruction STAINLESS STEEL SHEETS, COILS AN
D PLATES- (A) STAINLESS STEEL (AUSTENITIC & FERRITIC STEEL) COILS. THE COIL SHALL BE PROTECT
ED IN REASONABLY GOOD CONDITION TO WITHSTAND NORMAL HANDLING HAZARD DURING TRANSIT
WITH THE FOLLOWING PROVISION AS THE BAREST MINIMUM I) COIL SHOULD BE WRAPPED WITH A LA
YER OF WATER PROOF PAPER THROUGH OUT WHOLE LENGTH. II) COIL SHOULD BE WRAPPED WITH A L
AYER OF BIODEGRADEABLE SHEET. III) OUTER & INNER OF COIL SHOULD BE WRAPPED WITH GI SHEET
. IV) SIDE OF THE COIL SHOULD BE COVERED WITH CARD BOARD SHEET. V) AFTER THIS WHOLE COIL
SHOULD BE WRAPPED WITH BIODEGRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS. VI) THE INNE
R EDGE OF THE COIL SHOULD BE PROTECTED BY GI RING FOLLOWED BY ANOTHER IRON RING. VII) OU
TER EDGE OF THE COIL SHOULD BE WRAPPED WITH GI RING. VIII) COIL SHOULD BE SECURELY STRAPP
ED WITH MINIUM 5 STEEL BANDS THROUGH THE EYES OF THE COIL AND MINIUM 3 STEEL BANDS ON T
HE CIRCUMFERENCE OF THE EYE. IX) WHOLE COIL SHOULD BE MOUNTED ON WOODEN BLOCKS FOR E
ASY LIFTING/STACKING. X) THE SHEETS IN COIL FORM FOR THICKNESS 2MM AND ABOVE SHALL HAVE
INNER DIA OF COIL 450-800MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 2.4 - 10 TONNES
XI) THE SHEETS IN COIL FORM FOR THICKNESS BELOW 2MM SHALL HAVE INNER DIA OF COIL 450-650
MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 5.0 - 10 TONNES. (B) STAINLESS STEEL (AUST
ENITIC & FERRITIC STEEL PLATES/SHEETS) I) THE SHEETS/PLATES SHALL BE SUPPLIED IN BUNDLES OF
OPTIMUM WEIGHT 2MT+/-10% & EACH SHEET/PLATE SHALL BE SEPRATED WITH A LAYER OF WATER P
ROOF PAPER, AFTER THIS THE WHOLE BUNDLE SHOULD BE WRAPPED WITH DOUBLE LAYER OF WATER
PROOF PAPER AND A BIODEGRADEABLE PLASTIC SHEET OF SUITABLE THICKNESS. A METAL PROTECTI
ON IN EDGES SHOULD ALSO BE PROVIDED. II) ALL BUNDLES SHALL HAVE A MINIMUM OF 2 HOOPS UPT
O 1.2 METER IN LENGTH AND ONE EXTRA HOOP FOR EVERY ADDITIONAL METER. THE BUNDLES SHALL
ALSO BE PROVIDED WITH SKID (WOODEN PACKING UNDER NEATH) TO FACILITATE HANDLING. MECHA
NICAL DAMANGE & CORROSION DURING TRANSIT IF ANY SHALL BE AT THE COST OF SUPPLIER. , Procti
on Procedure COVERED IN PI [ Warranty Period 30 Months after the date of delivery ]
[Quantity Tolerance (+/-) 5 %age , Item Category Normal , Total PO value variation Permitt
ed Max 8 lacs ] ] |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|
|